The camera is able to read 1-dimensional barcodes when Barcode Unit BR-1 is attached. As the Barcode Unit BR-1 emits laser light in order to read the barcode, the recognition speed of the main camera lens section is very fast, and barcodes can be read even in dark places.
Even with the BR-1 attached, the camera supports IP64 dirt resistance and waterproofing, and can withstand the impact from a 1.5m fall.
The reading of one bar codes is supported. The saving of bar codes as camera memos can be useful for freight management in logistics, prevention of patient data mix-ups in medical facilities, etc.
The BR-1 is not equipped with a battery or on/off switch. When the camera is turned on, power is supplied to the BR-1, the status lamp (d) turns green, and an icon appears in the picture display.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
(linear barcodes only)
|Chinese 2 of 5, Codabar, Code 11,
Code 32 (Italian Pharma Code), Code 39,
Code 39 Full ASCII, Code 93, Code 128, EAN-8,
EAN-13, UCC/EAN128, MSI, Interleaved 2 of 5,
Discrete 2 of 5, UPC-A, UPC-E, JAN/UPC/EAN,
JAN/UPC/EAN with Supplementals
|Resolution||0.1016 mm – 1.3970 mm|
|Light source||Output: 0.7 mW
Wavelength: 655 nm
|MRD value||Min. 25% (wavelength = 650 nm)|
|Sampling frequency||104 ± 12 scans/sec|
|Ambient light||Artificial light: 4100 lx (excluding sodium-vapor lamps)
Sunlight: 91000 lx
|Power consumption||400 mW|
|Dimension s (W × H × D)||42.5 × 58.7 × 35.0 mm|
|Operating temperature||–10 °C to +40 °C|
|Operating humidity||20% – 90%|
|Storage temperature||–20 °C to +60 °C|
|Water/dust resistance (*)||JIS/IEC Class 4 water resistance, JIS/IEC Class 6
dust resistance (IP64)
|Resistance to disinfectant||Outer surface can be cleaned with ethanol and liquid sodium hypochlorite disinfectants|